Accurate Auto Repair, Inc.
4.8
Good StandingFr 8:00 AM – 3:00 PM
Sa-Su Closed
Do you plan to take your vehicle to a place like Springfield, IL with prolonged heat/cold or humidity in the next 3 months? Please consider the following impact on your vehicle:
High Humidity such as in Springfield, IL increases the likelihood of condensation inside the headlight housing. Water and electricity don't mix, which may cause a short circuit leading to failure of your lightbulb. In addition, any condensation water coming in contact with a hot light bulb may cause the bulb to break. Many different sensors in your vehicle let its car computer know if a potential problem is detected because they sense temperatures, pressures, filling level etc. to be out of normal range. Excess moisture from heavy humidity in Springfield, IL might cause the sensors to trip inadvertently and create a false positive, meaning they signal a problem even when there really isn't one. Every time a warning or the check engine light is on, get it diagnosed by a professional before you worry about the malfunction of your car.
Any or all of the following fixes might be proposed by your shop in Springfield, IL to restore your brake system to operate as designed and meet safety standards. THESE FIXES are offered by all shops IN the neighborhoods
If your brake system is acting differently, you might want to understand what problems might be developing. Check this list for a brake symptom similar to yours.
Cause: Worn-out brake pads often produce a high-pitched squeal, thanks to a built-in wear indicator that alerts you it's time for a replacement.
Grinding Sound When Braking
Cause: If the brake pads are completely worn down, the metal backing plate can scrape against the rotor, causing a harsh grinding noise and potential rotor damage.
Spongy or Soft Brake Pedal
Cause: Air in the brake lines, old or contaminated brake fluid, or a failing master cylinder can make the pedal feel soft or require more effort to stop.
Vehicle Pulling to One Side
Cause: Uneven wear on brake pads, a stuck caliper, or a brake fluid imbalance can cause the car to veer to one side when braking.
Vibration or Pulsation in the Brake Pedal
Cause: Warped rotors, caused by excessive heat or improper installation, can lead to vibrations when braking, much like a washing machine on an uneven spin cycle.
Cause: Overheated brakes, often from prolonged downhill braking or "riding" the brakes, can produce a sharp, chemical-like burning odor.
Cause: This can signal low brake fluid, worn brake pads, or a problem with the brake system, such as the ABS module.
Increased Stopping Distance
Cause: Worn pads, glazed rotors, or low brake fluid can reduce braking efficiency, making it take longer to stop the vehicle.
Brake Fluid Leaks
Cause: Damaged brake lines, a leaking master cylinder, or loose fittings can cause brake fluid to pool under the car or result in reduced hydraulic pressure.
Brake Pedal Feels Hard
Cause: A failing brake booster or vacuum leak can make the brake pedal difficult to press, requiring much more effort to slow down or stop the vehicle.