Dream Nissan Lawrence Service
4.6
Good StandingSa 8:00 AM – 1:00 PM
Su Closed
Lawrence Automotive Diagnostics
4.5
Good StandingWe 7:30 AM – 12:00 PM, 1:00 – 5:30 PM
Th-Fr 7:30 AM – 5:30 PM
Sa-Su Closed
Do you plan to take your vehicle to a place like Dallas, TX with prolonged heat/cold or humidity in the next 3 months? Please consider the following impact on your vehicle:
Heat is generated very quickly due to the friction between the brake pads and the brake rotors, so the brake system will remain warm long after the vehicle has been parked in Dallas, TX. Heavy braking can overheat the brakes, leading you to experience brake fade that reduces the efficiency of the brakes and lengthens the distance your vehicle comes to a complete halt. When engine oil is thinner due to heat, there is increased risk of leaks occurring. Additionally, higher temperaturestemperatires as in Dallas, TX can lead to insufficient lubrication, resulting in sludge formation. oil flow might be lowered and can impede your vehicle's overall performance.
High Humidity such as in Dallas, TX increases the likelihood of condensation inside the headlight housing. Water and electricity don't mix, which may cause a short circuit leading to failure of your lightbulb. In addition, any condensation water coming in contact with a hot light bulb may cause the bulb to break. Many different sensors in your vehicle let its car computer know if a potential problem is detected because they sense temperatures, pressures, filling level etc. to be out of normal range. Excess moisture from heavy humidity in Dallas, TX might cause the sensors to trip inadvertently and create a false positive, meaning they signal a problem even when there really isn't one. Every time a warning or the check engine light is on, get it diagnosed by a professional before you worry about the malfunction of your car.
Any or all of the following fixes might be proposed by your shop in Dallas, TX to restore your brake system to operate as designed and meet safety standards. THESE FIXES are offered by all shops IN the neighborhoods
Common symptoms that indicate the transmission is faulty are gears slipping, jerky acceleration, rough idling, and sudden bad fuel consumption. The vehicle’s transmission is extremely complex and can develop failures for many reasons. Still, you can get a clue of what’s the main problem in your transmission by observing the symptoms your vehicle shows.
Cause: Low transmission fluid, a worn-out clutch (manual), or a failing transmission solenoid can cause the gears to slip unexpectedly, leading to a loss of power or a jerking motion.
Delayed or Rough Shifting
Cause: Low fluid levels, worn-out shift solenoids, or a malfunctioning valve body can lead to hard or delayed shifting, making it feel as if the vehicle is struggling to change gears.
Cause: Worn-out gears, a failing clutch, or a malfunctioning transmission bearing can produce grinding, whining, or buzzing noises when the vehicle shifts or accelerates.
Cause: Damaged seals, worn gaskets, or loose bolts can lead to transmission fluid leaks, causing low fluid levels and potential transmission damage.
Check Engine Light or Transmission Warning Light
Cause: This could indicate issues with the transmission control module (TCM), low fluid, or internal transmission problems that need diagnostic attention.
Car Won’t Go into Gear (Manual or Automatic)
Cause: A damaged clutch (manual), low transmission fluid, or a malfunctioning shift linkage can prevent the vehicle from properly engaging gears.
Cause: Overheating of the transmission due to low fluid or excessive slipping can produce a burning smell, signaling that the transmission is under stress.
Cause: A failing torque converter, worn-out motor mounts, or imbalanced driveshaft can cause vibrations when the transmission is in gear.
Sticking or Hesitating When Accelerating
Cause: A dirty or clogged transmission filter, low fluid levels, or a failing transmission control module can cause hesitation or a delay in acceleration.
Can't Reverse
Cause: A damaged reverse gear, low fluid levels, or a malfunctioning transmission control solenoid can prevent the vehicle from going into reverse.